MANN+HUMMEL is pleased to introduce a new innovation to the existing FM025 product that permits an oil drain internal diameter from the existing 25 mm to 12 mm.

This is achieved only when the following criteria are met:

- Attached a fitting to the underside of mounting bracket that will fit a 19 mm internal diameter hose.

- Position the centrifugal oil cleaner 320 mm higher than the oil return point run the hose 320 mm x 19 mm I/D and reduce the end fiting as it enters he return point to 12 mm I/D.

- The MANN+HUMMEL centrifugal oil cleaner will not work if these size dimensions are changed to smaller dimensions.

	Model is only available with cleanable rotor.
	The net weight is 1.4 kg.
	Suitable for engines with lubrication system capacity from 5 to 15 litres.
	Rotor dirt capacity is of 0.25 litres.
	Rotor oil capacity is of 0.32 litres.
	Minimum oil feed pipe size is 6 mm in internal diameter.
	Minimum oil drain pipe size is 12 mm in internal diameter.
	Available with or without Cut Off Valve (C.O.V.).

*The centrifugal oil cleaner model detailed above is part of the MANN+HUMMEL centrifugal oil cleaner range that can be applied in this particular market.

*Pls. contact MANN+HUMMEL for further information.